DNR Context
https://www.axigen.com/documentation/dnr-context-p45254449
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [logHost <host>] – sets the service's remote logging host
RESET – resets the service to the currently active configuration
Setting Up Custom SMTP and EHLO Banners
https://www.axigen.com/documentation/setting-up-custom-smtp-and-ehlo-banners-p45254327
This is where the value that you configured for the EHLO banner should be reflected
POP3
https://www.axigen.com/documentation/pop3-p45253821
Listeners
Listeners can be defined and managed to add extra flexibility and configurability to this service...Management
The Axigen mail server is designed to run on different machine configurations and operating systems, on networks with various traffic loads, structures, domain configurations, user rights
SPF (Sender Policy Framework)
https://www.axigen.com/documentation/spf-sender-policy-framework-p47120679
DNS Configuration
Add entries similar with:
HSP Overview
https://www.axigen.com/documentation/hsp-overview-p45254848
The files for each module are stored at the location indicated by the corresponding ‘path’ parameter, found in the WebMail and WebAdmin contexts from the Axigen configuration file (axigen.cfg)
iCalendar Functionality
https://www.axigen.com/documentation/icalendar-functionality-p45254798
using this type of address, one can see calendar and task information stored in a public folder;
The “pf” particle is always the same, regardless of the public folder root configured...Axigen configuration
Starting with Axigen version 9.0, the iCalendar configuration options reside in the "Services → Mobility & Sync" context.
Mobility & Sync — ActiveSync, CalDAV & CardDAV
https://www.axigen.com/documentation/mobility-sync-activesync-caldav-carddav-p44433435
This page covers the software / hardware requirements, design, provisioning, and configuration details – where applicable – for the supported sync protocols supported by Axigen
Managing the Mailing List Message Filters
https://www.axigen.com/documentation/managing-the-mailing-list-message-filters-p1373440820
Each message rule can be deleted or further configured using the "Delete" and "Edit" buttons...When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
Domain Context
https://www.axigen.com/documentation/domain-context-p45254465
CONFIG folderRcptDefaultLimits – enters the folder recipient default limits context
CONFIG autodiscovery – enters the autodiscovery domain parameters configuration...DISABLE traceLog Account <accountName> [allfolders | folder <foldername>] - disable trace log for account folders
UPGRADE Storage – upgrades storage representation of configuration
RPOP Context
https://www.axigen.com/documentation/rpop-context-p668598390
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [logHost <host>] – sets the service's remote logging host
RESET – resets the service to the currently active configuration
Modularity
https://www.axigen.com/documentation/modularity-p45253435
Running services can be configured at service, domain and account level...Administration Tools
The administration tools enable both centralized configuration (WebAdmin and Command Line Interface) and manual configuration (configuration file)
Advanced Acceptance & Routing Rules
https://www.axigen.com/documentation/advanced-acceptance-routing-rules-p1373442035
The "Acceptance & Routing" → "Advanced Settings" page allows you to configure a set of advanced message acceptance and routing policies for incoming and outgoing SMTP modules...When you are done configuring these parameters, remember to hit the "Save Configuration" button to preserve your changes
Enabling / Disabling a Service
https://www.axigen.com/documentation/enabling-disabling-a-service-p45253911
When disabling a service at server level, the configuration is not inherited by the domain or user levels.
Axigen Cluster Deployment with DRBD
https://www.axigen.com/documentation/axigen-cluster-deployment-with-drbd-p45255028
Package Installation
Axigen must be installed on both nodes, just the package, without being started or configured...Then, the corresponding configuration file must be created as /etc/sysconfig/axigen-ha, with the following configuration:
# The AXIGEN_BACKEND variable can be named as follows
WebMailproxy Context
https://www.axigen.com/documentation/webmailproxy-context-p668631145
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...REMOVE HostNameResolver [host] <host> – removes a host name (WebMail URL) to HSP template name mapping
SHOW HostNameResolver [host] <host> – shows a virtual host configuration
Chart Counters
https://www.axigen.com/documentation/chart-counters-p1373442638
When you are done configuring these parameters, remember to hit the "Save Configuration" button to preserve your changes
Archiving
https://www.axigen.com/documentation/archiving-p45253883
An article presenting the configuration steps for integrating Axigen with MailArchiva, using the Milter interface is available here
Auto-discovery for Outlook (via IMAP / POP3)
https://www.axigen.com/documentation/auto-discovery-for-outlook-via-imap-pop3-p49120001
For Outlook 2010, please review Microsoft documentation on automatic user account configurations here!--https://technet.microsoft.com/en-us/library/cc511507%28v=office.14%29.aspx...In your DNS server, configure an entry with the name autodiscover.youremaildomain.tld, such as:
autodiscover IN A 193.230.245.23
DNR
https://www.axigen.com/documentation/dnr-p45253842
Options
In this section you can configure the time period after the first DNR query is closed, maximum number of DNR query retries to be executed and number of results (IP addresses) cached for each...Nameservers
When performing DNR searches, Axigen uses a list of known nameservers (specified in the OS configuration)
POP3proxy Context
https://www.axigen.com/documentation/pop3proxy-context-p668631123
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [greetingsText <text>] – sets the greeting text for this service
RESET – resets the service to the currently active configuration
DomainKeys
https://www.axigen.com/documentation/domainkeys-p45253599
Select "DK - Check Domain Key" from the "Actions" list, click "Add Action";
"Save Configuration"
Make sure you use suggestive "Rule names" for the above rules...Please note that your DNS must be configured accordingly in order to implement domain keys signing
IMAPproxy Context
https://www.axigen.com/documentation/imapproxy-context-p668598372
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [imapShowAllFolders <yes|no>] - list shows all folders or just the mail ones
RESET – resets the service to the currently active configuration
axigen.cfg Definitions
https://www.axigen.com/documentation/axigen-cfg-definitions-p47120646
objects set, a set of objects inclosed by round parentheses ()
Some attributes have DEFAULT values (specified below) which are used when the respective attributes are missing from configuration
IPv6 Support
https://www.axigen.com/documentation/ipv6-support-p45253586
The SMTP outgoing service has to be configured via CLI for Axigen to use the IPv6 network (the configuration to use IPv6 in SMTP outgoing is off by default)
Setting Up Limits for Domain Admins
https://www.axigen.com/documentation/setting-up-limits-for-domain-admins-p1373438203
To configure the parameters relative to the limits and restrictions set at the domain level for specific administrative users hit the Configure button...When you are done configuring these parameters click the "Save Configuration" button to preserve the newly-specified values