Managing Groups
https://www.axigen.com/documentation/managing-groups-p1373439575
If you are done configuring the group click the "Quick Add" button. Alternatively, click the "Advanced Config" link if you prefer to further configure it...This link and the "Edit" button, corresponding to a previously created group, give access to two configuration pages: "General" and "Message Filters
The Reporting Module
https://www.axigen.com/documentation/the-reporting-module-p45253856
The SNMP agent is read-only for the Axigen configuration settings...In their turn, these tools can be configured to notify you about the status of the server, by email, phone, pager or other means
Mailbox API – Account
https://www.axigen.com/documentation/mailbox-api-account-p666828978
},
twoFactorAuthConfigured: Boolean, // The flag indicating that the 2-Step Verification is configured for the account...teams is enabled for the account
configured: Boolean // The flag indicating that the integration with teams is configured for the account
}
Adding Charts in Axigen
https://www.axigen.com/documentation/adding-charts-in-axigen-p45252820
As previously explained, the Axigen Reporting service can be configured to monitor various parameters of interest...The above charts are mentioned as a guideline of the required steps to create and configure a chart.
WebAdmin Context
https://www.axigen.com/documentation/webadmin-context-p45254445
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...CONFIG AccessControl – enters the AccessControl context
RESET – resets the service to the currently active configuration
Defining Account Class Message Filters
https://www.axigen.com/documentation/defining-account-class-message-filters-p1373440340
Each rule can be deleted or further configured using the "Delete" and "Edit" buttons...When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
DNR Context
https://www.axigen.com/documentation/dnr-context-p45254449
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [logHost <host>] – sets the service's remote logging host
RESET – resets the service to the currently active configuration
Setting Up Custom SMTP and EHLO Banners
https://www.axigen.com/documentation/setting-up-custom-smtp-and-ehlo-banners-p45254327
This is where the value that you configured for the EHLO banner should be reflected
POP3
https://www.axigen.com/documentation/pop3-p45253821
Listeners
Listeners can be defined and managed to add extra flexibility and configurability to this service...Management
The Axigen mail server is designed to run on different machine configurations and operating systems, on networks with various traffic loads, structures, domain configurations, user rights
SPF (Sender Policy Framework)
https://www.axigen.com/documentation/spf-sender-policy-framework-p47120679
DNS Configuration
Add entries similar with:
HSP Overview
https://www.axigen.com/documentation/hsp-overview-p45254848
The files for each module are stored at the location indicated by the corresponding ‘path’ parameter, found in the WebMail and WebAdmin contexts from the Axigen configuration file (axigen.cfg)
iCalendar Functionality
https://www.axigen.com/documentation/icalendar-functionality-p45254798
using this type of address, one can see calendar and task information stored in a public folder;
The “pf” particle is always the same, regardless of the public folder root configured...Axigen configuration
Starting with Axigen version 9.0, the iCalendar configuration options reside in the "Services → Mobility & Sync" context.
Mobility & Sync — ActiveSync, CalDAV & CardDAV
https://www.axigen.com/documentation/mobility-sync-activesync-caldav-carddav-p44433435
This page covers the software / hardware requirements, design, provisioning, and configuration details – where applicable – for the supported sync protocols supported by Axigen
Managing the Mailing List Message Filters
https://www.axigen.com/documentation/managing-the-mailing-list-message-filters-p1373440820
Each message rule can be deleted or further configured using the "Delete" and "Edit" buttons...When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
Domain Context
https://www.axigen.com/documentation/domain-context-p45254465
CONFIG folderRcptDefaultLimits – enters the folder recipient default limits context
CONFIG autodiscovery – enters the autodiscovery domain parameters configuration...DISABLE traceLog Account <accountName> [allfolders | folder <foldername>] - disable trace log for account folders
UPGRADE Storage – upgrades storage representation of configuration
RPOP Context
https://www.axigen.com/documentation/rpop-context-p668598390
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [logHost <host>] – sets the service's remote logging host
RESET – resets the service to the currently active configuration
Modularity
https://www.axigen.com/documentation/modularity-p45253435
Running services can be configured at service, domain and account level...Administration Tools
The administration tools enable both centralized configuration (WebAdmin and Command Line Interface) and manual configuration (configuration file)
Advanced Acceptance & Routing Rules
https://www.axigen.com/documentation/advanced-acceptance-routing-rules-p1373442035
The "Acceptance & Routing" → "Advanced Settings" page allows you to configure a set of advanced message acceptance and routing policies for incoming and outgoing SMTP modules...When you are done configuring these parameters, remember to hit the "Save Configuration" button to preserve your changes
Enabling / Disabling a Service
https://www.axigen.com/documentation/enabling-disabling-a-service-p45253911
When disabling a service at server level, the configuration is not inherited by the domain or user levels.
Axigen Cluster Deployment with DRBD
https://www.axigen.com/documentation/axigen-cluster-deployment-with-drbd-p45255028
Package Installation
Axigen must be installed on both nodes, just the package, without being started or configured...Then, the corresponding configuration file must be created as /etc/sysconfig/axigen-ha, with the following configuration:
# The AXIGEN_BACKEND variable can be named as follows
WebMailproxy Context
https://www.axigen.com/documentation/webmailproxy-context-p668631145
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...REMOVE HostNameResolver [host] <host> – removes a host name (WebMail URL) to HSP template name mapping
SHOW HostNameResolver [host] <host> – shows a virtual host configuration
Chart Counters
https://www.axigen.com/documentation/chart-counters-p1373442638
When you are done configuring these parameters, remember to hit the "Save Configuration" button to preserve your changes
Archiving
https://www.axigen.com/documentation/archiving-p45253883
An article presenting the configuration steps for integrating Axigen with MailArchiva, using the Milter interface is available here
Auto-discovery for Outlook (via IMAP / POP3)
https://www.axigen.com/documentation/auto-discovery-for-outlook-via-imap-pop3-p49120001
For Outlook 2010, please review Microsoft documentation on automatic user account configurations here!--https://technet.microsoft.com/en-us/library/cc511507%28v=office.14%29.aspx...In your DNS server, configure an entry with the name autodiscover.youremaildomain.tld, such as:
autodiscover IN A 193.230.245.23
DNR
https://www.axigen.com/documentation/dnr-p45253842
Options
In this section you can configure the time period after the first DNR query is closed, maximum number of DNR query retries to be executed and number of results (IP addresses) cached for each...Nameservers
When performing DNR searches, Axigen uses a list of known nameservers (specified in the OS configuration)