Message Acceptance Policies
https://www.axigen.com/documentation/message-acceptance-policies-p45253615
They can also be created automatically via the WebAdmin Wizard...For each event, the server calls certain methods which can have a configurable or predefined behavior
Logging into the WebAdmin Interface
https://www.axigen.com/documentation/logging-into-the-webadmin-interface-p45252869
The WebAdmin module, according to the default configuration listens to the 9000/tcp port
Clustering: Hardware Requirements
https://www.axigen.com/documentation/clustering-hardware-requirements-p45255079
Servers
The hardware recommendation for all of the solution nodes should match the performance of the following system configuration...More powerful hardware configurations can also be used and the hardware configuration should be accepted as a baseline example:
CPU: Intel Xeon Quad-Core (>2 GHz, 1333 MHz FSB)
CLI Service Description
https://www.axigen.com/documentation/cli-service-description-p45254399
The CLI service can be configured in its turn similarly to the other services, either by editing the configuration files or by using the remote configuration tools like CLI and WebAdmin...If you want to reset the configuration for that context, issue a CANCEL or a RESET command
Defining Account Contacts
https://www.axigen.com/documentation/defining-account-contacts-p1373441322
When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
Basic Routing Settings
https://www.axigen.com/documentation/basic-routing-settings-p1373441968
Domain Specific Configuration
Set up custom routing settings for certain domains in the "Domain-specific configuration" section...When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
General Group Settings
https://www.axigen.com/documentation/general-group-settings-p1373439610
When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
Setting Up the DNR (Domain Name Resolver)
https://www.axigen.com/documentation/setting-up-the-dnr-domain-name-resolver-p45253862
In order to be able to send emails out, Axigen will need to have at least one DNS server configured in WebAdmin in the Services → DNR Service Configuration...If you don't configure a DNS server in the DNR settings page, then, in order to be able to send emails, you will have to configure a relay host using its IP in WebAdmin → Security and Filtering → Acceptance
Back-end Services Setup
https://www.axigen.com/documentation/back-end-services-setup-p45253740
Thus, the Axigen services that run on these systems are very similar in configuration to the services that run on any stand-alone Axigen server...All details concerning the actual user account settings must be defined and configured on the back-end systems, through any of the administration interfaces
Command-line Parameters
https://www.axigen.com/documentation/command-line-parameters-p47120630
-K, --check-configuration – Check configuration files, report errors and exit.
-u, --user username – User's name who executes the server. Default to "axigen'...--rmtuning level – Configure resource manager behavior. Possible values: lazy, normal, aggressive, paranoia.
--stop-timeout – Maximum time to wait for a child process to stop (in seconds)
Configuring Account Defaults
https://www.axigen.com/documentation/configuring-account-defaults-p1373440155
→ "Account Defaults" page defines default values for the parameters that will be automatically inherited by all new accounts and account classes and can be explicitly set (overridden) in the advanced configuration
Securing SMTP Services
https://www.axigen.com/documentation/securing-smtp-services-p47120604
Updated: September 21, 2021
The following page will show you how to enable advanced configuration settings within the Axigen WebAdmin in order to secure SMTP Receiving services
CardDAV
https://www.axigen.com/documentation/carddav-p45252987
Axigen Configuration
To enable CardDAV support in the Axigen product, the administrator must log in and enable the respective option in the CLI or in the Webmail service configuration context...In the default configuration, CardDAV support is enabled.
WebAdmin configuration for CardDAV resides in the "Services → Mobility & Sync" context
Setting Up Incoming Message Rules
https://www.axigen.com/documentation/setting-up-incoming-message-rules-p1373441843
When you are done configuring these parameters, remember to hit the "Save Configuration" button to preserve your changes...When you are done configuring these parameters remember to click the "Save Configuration" button to preserve your changes
Enabling / Disabling Groupware for a Domain
https://www.axigen.com/documentation/enabling-disabling-groupware-for-a-domain-p1373439920
There is no need to use the "Save Configuration" button after enabling Groupware. Disabling Groupware also requires a server restart
Log Context
https://www.axigen.com/documentation/log-context-p45254429
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [logHost <host>] – sets the service's remote logging host
RESET – resets the service to the currently active configuration
Pacemaker and Corosync
https://www.axigen.com/documentation/pacemaker-and-corosync-p45255030
Configuration
Before starting the cluster configuration we have to be sure that both nodes are also reachable by their short name and if the DNS does not resolve them accordingly (based on default search...DRBD Resource
Create a configuration file to be used to commit all configuration changes atomically
axigen.cfg Restrictions
https://www.axigen.com/documentation/axigen-cfg-restrictions-p47120642
maximum attribute name length: 64
maximum attribute value length: 128 (expressed as string in configuration file)...Each time you modify the main configuration file, a reload signal must be sent to Axigen, in order to load the new configuration settings.
Architectural Preparations
https://www.axigen.com/documentation/architectural-preparations-p45253499
The cluster can function with many names and storage configurations, but this chapter defines some guidelines for better administration and understanding of the cluster configuration and architecture...Example Configuration
This document uses an example setup configuration, explained below
Services Architecture
https://www.axigen.com/documentation/services-architecture-p45253623
Administration Tools
The administration tools enable both centralized configuration (WebAdmin and Command Line Interface) and manual configuration (configuration file)...For each service described in the Architecture chapter, configuration options are available in each of these tools (WebAdmin, CLI and the configuration file, axigen.cfg)
Setting Up a Message Appender
https://www.axigen.com/documentation/setting-up-a-message-appender-p1373440085
When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
Managing Account Aliases
https://www.axigen.com/documentation/managing-account-aliases-p1373441022
When you are done configuring these parameters, remember to click the Save Configuration button to preserve your changes.
Managing Accounts
https://www.axigen.com/documentation/managing-accounts-p1373440982
If you are done configuring the account hit the "Quick Add" button. Alternatively, should you prefer to further fine-tune it click the "Advanced Config" link...This link and the "Edit" button corresponding to an already created account gives access to six configuration pages:
General;
Enabling DNS Checks
https://www.axigen.com/documentation/enabling-dns-checks-p1373442273
When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
Clustering: Solution Overview
https://www.axigen.com/documentation/clustering-solution-overview-p45255075
The hot stand-by node can take over as many failed nodes as it is configured to replace...In Axigen, the LDAP connectors can be configured for each domain, or generic LDAP connectors can be configured use place holders, expanded by Axigen into specific data (i.e