Setting Up Custom SMTP and EHLO Banners
https://www.axigen.com/documentation/setting-up-custom-smtp-and-ehlo-banners-p45254327
This is where the value that you configured for the EHLO banner should be reflected
HSP Overview
https://www.axigen.com/documentation/hsp-overview-p45254848
The files for each module are stored at the location indicated by the corresponding ‘path’ parameter, found in the WebMail and WebAdmin contexts from the Axigen configuration file (axigen.cfg)
SPF (Sender Policy Framework)
https://www.axigen.com/documentation/spf-sender-policy-framework-p47120679
DNS Configuration
Add entries similar with:
RPOP Context
https://www.axigen.com/documentation/rpop-context-p668598390
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [logHost <host>] – sets the service's remote logging host
RESET – resets the service to the currently active configuration
iCalendar Functionality
https://www.axigen.com/documentation/icalendar-functionality-p45254798
using this type of address, one can see calendar and task information stored in a public folder;
The “pf” particle is always the same, regardless of the public folder root configured...Axigen configuration
Starting with Axigen version 9.0, the iCalendar configuration options reside in the "Services → Mobility & Sync" context.
Managing the Mailing List Message Filters
https://www.axigen.com/documentation/managing-the-mailing-list-message-filters-p1373440820
Each message rule can be deleted or further configured using the "Delete" and "Edit" buttons...When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
Enabling / Disabling a Service
https://www.axigen.com/documentation/enabling-disabling-a-service-p45253911
When disabling a service at server level, the configuration is not inherited by the domain or user levels.
Advanced Acceptance & Routing Rules
https://www.axigen.com/documentation/advanced-acceptance-routing-rules-p1373442035
The "Acceptance & Routing" → "Advanced Settings" page allows you to configure a set of advanced message acceptance and routing policies for incoming and outgoing SMTP modules...When you are done configuring these parameters, remember to hit the "Save Configuration" button to preserve your changes
Modularity
https://www.axigen.com/documentation/modularity-p45253435
Running services can be configured at service, domain and account level...Administration Tools
The administration tools enable both centralized configuration (WebAdmin and Command Line Interface) and manual configuration (configuration file)
Domain Context
https://www.axigen.com/documentation/domain-context-p45254465
CONFIG folderRcptDefaultLimits – enters the folder recipient default limits context
CONFIG autodiscovery – enters the autodiscovery domain parameters configuration...DISABLE traceLog Account <accountName> [allfolders | folder <foldername>] - disable trace log for account folders
UPGRADE Storage – upgrades storage representation of configuration
Axigen Cluster Deployment with DRBD
https://www.axigen.com/documentation/axigen-cluster-deployment-with-drbd-p45255028
Package Installation
Axigen must be installed on both nodes, just the package, without being started or configured...Then, the corresponding configuration file must be created as /etc/sysconfig/axigen-ha, with the following configuration:
# The AXIGEN_BACKEND variable can be named as follows
Chart Counters
https://www.axigen.com/documentation/chart-counters-p1373442638
When you are done configuring these parameters, remember to hit the "Save Configuration" button to preserve your changes
WebMailproxy Context
https://www.axigen.com/documentation/webmailproxy-context-p668631145
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...REMOVE HostNameResolver [host] <host> – removes a host name (WebMail URL) to HSP template name mapping
SHOW HostNameResolver [host] <host> – shows a virtual host configuration
Auto-discovery for Outlook (via IMAP / POP3)
https://www.axigen.com/documentation/auto-discovery-for-outlook-via-imap-pop3-p49120001
For Outlook 2010, please review Microsoft documentation on automatic user account configurations here!--https://technet.microsoft.com/en-us/library/cc511507%28v=office.14%29.aspx...In your DNS server, configure an entry with the name autodiscover.youremaildomain.tld, such as:
autodiscover IN A 193.230.245.23
Archiving
https://www.axigen.com/documentation/archiving-p45253883
An article presenting the configuration steps for integrating Axigen with MailArchiva, using the Milter interface is available here
DNR
https://www.axigen.com/documentation/dnr-p45253842
Options
In this section you can configure the time period after the first DNR query is closed, maximum number of DNR query retries to be executed and number of results (IP addresses) cached for each...Nameservers
When performing DNR searches, Axigen uses a list of known nameservers (specified in the OS configuration)
POP3proxy Context
https://www.axigen.com/documentation/pop3proxy-context-p668631123
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [greetingsText <text>] – sets the greeting text for this service
RESET – resets the service to the currently active configuration
DomainKeys
https://www.axigen.com/documentation/domainkeys-p45253599
Select "DK - Check Domain Key" from the "Actions" list, click "Add Action";
"Save Configuration"
Make sure you use suggestive "Rule names" for the above rules...Please note that your DNS must be configured accordingly in order to implement domain keys signing
IMAPproxy Context
https://www.axigen.com/documentation/imapproxy-context-p668598372
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [imapShowAllFolders <yes|no>] - list shows all folders or just the mail ones
RESET – resets the service to the currently active configuration
IPv6 Support
https://www.axigen.com/documentation/ipv6-support-p45253586
The SMTP outgoing service has to be configured via CLI for Axigen to use the IPv6 network (the configuration to use IPv6 in SMTP outgoing is off by default)
axigen.cfg Definitions
https://www.axigen.com/documentation/axigen-cfg-definitions-p47120646
objects set, a set of objects inclosed by round parentheses ()
Some attributes have DEFAULT values (specified below) which are used when the respective attributes are missing from configuration
Basic Acceptance Settings
https://www.axigen.com/documentation/basic-acceptance-settings-p1373441918
The "Acceptance & Routing" → "Acceptance Basic Settings" page allows you to configure a set of basic acceptance policies at the SMTP-connection level such as the maximum size for received emails, the allowed...This can be configured via the CLI interface.
When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
Setting Up Limits for Domain Admins
https://www.axigen.com/documentation/setting-up-limits-for-domain-admins-p1373438203
To configure the parameters relative to the limits and restrictions set at the domain level for specific administrative users hit the Configure button...When you are done configuring these parameters click the "Save Configuration" button to preserve the newly-specified values
Server Administration
https://www.axigen.com/documentation/server-administration-p45253582
With the web-based administration front-end, configuration is a breeze and maintenance simple and straightforward, while all day-to-day tasks can be easily automated...Administration: web based, command line – configure service specific parameters through Axigen's Web Administration interface, with quick links and contextual help
Admin Delegation
https://www.axigen.com/documentation/admin-delegation-p45253798
The WebAdmin Administration Rights section gives access to parameters configuring the behavior of such administrative users or imposing the limitations for each type of administrative user created...Server level permissions – delegated administrators access level can be controlled by setting specific server-level permissions like: manage server configuration, manage services, manage backup, manage