SMTP-Outgoing Context
https://www.axigen.com/documentation/smtp-outgoing-context-p45254435
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [logHost <host>] – sets the service's remote logging host
RESET – resets the service to the currently active configuration
WebAdmin
https://www.axigen.com/documentation/webadmin-p45253825
While alternative methods are provided (Command Line Interface, text-editable configuration file), WebAdmin is the most intuitive and user-friendly tool...WebAdmin is a web-based configuration interface, tested for Mozilla and Internet Explorer, which gives you access to all configuration parameters for all services in the Axigen messaging solution
Auto-discovery Prerequisites
https://www.axigen.com/documentation/auto-discovery-prerequisites-p49119987
Before configuring the Auto-discovery parameters, please make sure the protocol listeners intended to be advertised by the Auto-discovery feature are accessible and can be successfully used by a manually
SMTP Receiving
https://www.axigen.com/documentation/smtp-receiving-p45253817
Listeners
Listeners can be defined and managed to add extra flexibility and configurability to this service...Management
The Axigen mail server is designed to run on different machine configurations and operating systems, on networks with various traffic loads, structures, domain configurations, user rights
Managing the Group Message Filters
https://www.axigen.com/documentation/managing-the-group-message-filters-p1373439640
Each rule can be deleted or further configured using the "Delete" and "Edit" buttons...When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
Axigen
https://www.axigen.com/documentation/axigen-p45253505
Then, the corresponding configuration file must be created as /etc/sysconfig/axigen-axib1, with the following configuration:
# The AXIGEN_BACKEND variable is specific to failover domain...Depending on your setup, other parameters from the LDAP connector configuration may be set. Please tune this configuration according to your needs
Configuring Mailing List Quotas and Restrictions
https://www.axigen.com/documentation/configuring-mailing-list-quotas-and-restrictions-p1373440775
When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
Report Context
https://www.axigen.com/documentation/report-context-p45254453
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [SNMPEnable <yes|no>] – enables/disables the snmp module
SET [SNMPSentTrapsToAllManagers <yes|no>] – enables/disables sending traps to all managers (including managers not added from configuration
OpenLDAP
https://www.axigen.com/documentation/openldap-p45253503
The first architectural configuration is similar with Axigen's setup, with one or more OpenLDAP nodes serving different domains, each one of them configured with a corresponding hot stand-by node sharing...Modify the ldap system init script configuration file, to point to the cluster configuration file:
You should also configure
Common CLI Commands
https://www.axigen.com/documentation/common-cli-commands-p45254403
DONE – this command saves the changes for a child context and switches back to the previous context but does not write anything to the server's configuration...This usually applies to contexts unrelated to the object-child object configuration hierarchy
Adding a User in a Domain
https://www.axigen.com/documentation/adding-a-user-in-a-domain-p45253903
You can also set the user to inherit settings from an account class by using the "Inherit configuration details from" drop-down menu or explicitly configure the settings for the user...Click the "Save Configuration" button to save your changes.
Version published after converting to the new editor
Managing the Account Message Filters
https://www.axigen.com/documentation/managing-the-account-message-filters-p1373441059
Each rule can be deleted or further configured using the "Delete" and "Edit" buttons...When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes
FTP Backup Context
https://www.axigen.com/documentation/ftp-backup-context-p45254447
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...CONFIG AccessControl – enters the AccessControl context
RESET – resets the service to the currently active configuration
IMAP
https://www.axigen.com/documentation/imap-p45253819
Listeners
Listeners can be defined and managed to add extra flexibility and configurability to this service...Management
The Axigen mail server is designed to run on different machine configurations and operating systems, on networks with various traffic loads, structures, domain configurations, user rights
Defining Mailing List Subscription and Posting Rules
https://www.axigen.com/documentation/defining-mailing-list-subscription-and-posting-rules-p1373440710
When you are done configuring these parameters, remember to hit the "Save Configuration" button to preserve your changes
SNI Certificate Selection for SSL listeners
https://www.axigen.com/documentation/sni-certificate-selection-for-ssl-listeners-p2467430402
IMAP (ports configured for IMAPS and IMAP+STARTTLS)
POP3 (ports configured for POP3S and POP3+STARTTLS)...(ports configured for SMTPS and SMTP+STARTTLS)
Other services (WebMail) continue to use their existing virtual host certificate configuration
Structure
https://www.axigen.com/documentation/structure-p45253863
domain, at least three storages are used:
one storage for domain configuration, where all domain specific configuration, the public folder and the list of domain objects (users, maillist, forwarders..., etc.) are stored;
one storage for domain objects configuration, where all domain objects configurations and folders are stored;
one or more storages for messages, where
CalDAV Implementation Details
https://www.axigen.com/documentation/caldav-implementation-details-p47120760
Collection Paths
For CalDAV clients that do not perform discovery and have to be configured by using a path to a calendar collection Axigen uses the following conventions
for local calendar...Logging
The CalDAV server runs on top of WebMail so CalDAV logging is controlled by the WebMail logging configuration
IMAP Context
https://www.axigen.com/documentation/imap-context-p45254441
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...CONFIG AccessControl – enters the AccessControl context
RESET – resets the service to the currently active configuration
UserDB Context
https://www.axigen.com/documentation/userdb-context-p668598404
.>] – sets the maximum number of processing threads
RESET – resets the service to the currently active configuration
ADD ldapConnector [name] <name> ldapUri <uri> – adds a ldap
Account Classes
https://www.axigen.com/documentation/account-classes-p45253800
Some service settings are unavailable at this level, such as RPOP configuration...Domain Level – this is the middle ground; the settings configured here override the settings applied on the server level
Managing the Domain Message Filters
https://www.axigen.com/documentation/managing-the-domain-message-filters-p1373440185
To add a new rule for the configured domain, click the "Add Message Rule" button. These can be deleted or further configured using the "Delete" and "Edit" buttons...When you are done configuring these parameters, remember to click the "Save Configuration" button to preserve your changes.
Mailbox API – Account Settings
https://www.axigen.com/documentation/mailbox-api-account-settings-p891191397
WebMail UI Settings
For Axigen WebMail frontend-specific settings and configurations.
The UI Settings endpoints are available starting with Axigen X5...Client UI Settings
For custom frontend-specific settings and configurations
The UI Settings endpoints are available starting with Axigen X5 (10.5)
Overview
https://www.axigen.com/documentation/overview-p45253726
Finally, the backend tier provides access to persistent data (such as account configuration and mailbox data); each node in the backend tier is capable of responding to requests for a set of accounts
SMTP-Incoming Context
https://www.axigen.com/documentation/smtp-incoming-context-p45254433
SHOW [ATTR <param>] – shows information about this context
SAVE Config – saves the server's running configuration...SET [enableSmtpRouting <yes – allows this service to become a routing smtp service
RESET – resets the service to the currently active configuration